Metallic, insulated flexible ductwork
BS EN 13180 defines flexible ductwork as: 'Duct which can be manually longitudinally compressed or decompressed and flexed without permanently damaging the cross section area'
Structural Fixings for Ductwork Systems BG 10/2010, By Glenn Hawkins, Published by BSRIA in 2010, lists the following types of flexible ductwork:
- Metallic, uninsulated flexible ductwork
- Metallic, insulated flexible ductwork
- Non-metallic, uninsulated flexible ductwork
- Non-metallic, insulated flexible ductwork
- Acoustic flexible ductwork
It suggests that metallic, insulated flexible ductwork is most commonly composed of:
- An inner core of aluminium and polyester laminate supported by an encapsulated high-tensile steel wire helix
- Fibreglass, mineral wool or microfibre insulation
- An outer core of aluminium and polyester laminate.
--BSRIA
[edit] Related articles on Designing Buildings
Featured articles
Check out some of the best features and news from Designing Buildings as well as key stories from around the web.
New measures to stop people being ripped off
Government to protect families from cowboy builders and aggressive bailiffs.
New Futurebuild showcase brings an innovation-first approach.
National Planning Policy Framework
Understanding the 2026 changes.
ECA's public affairs priorities
Member consultation opens to shape priorities for 2027 to 2030.
Dutyholder responsibilities from 1 July 2026.
Where performance meets practice
The Building Envelope Stage at UKCW Birmingham.
CIAT publishes briefing on planning reforms.
Leaders in Learning for Practice Network
Call for conservation leaders in learning to register interest in new network.
The importance of early engagement
Construction lessons from the Trillium HealthWorks Experience Centre.
Mayors are to be given planning call in powers
Mayors across England will be able to make the most important planning decisions.
The Master Builder: William Butterfield and his times. Book review.
Why construction can't afford to ignore the skills gap.